ECO-WORTHY 48V 100Ah LiFePO4 Battery Bluetooth 5.12 kWh Energy Storage

  
Closed-loop communication battery: The ECO-WORTHY 48V (51.2V) LiFePO4 battery supports CAN/RS485 communication and is compatible with most hybrid inverters on the market. The 48V 100Ah lithium batteries are fully compatible with standard 3U cabinets and can be mounted vertically to save space.

Bluetooth function and low-temperature protection: The ECO-WORTHY 48V 100Ah LiFePO4 battery includes Bluetooth, allowing you to view real-time battery data (SOC) through the ECO-WORTHY app, such as battery voltage, current, and capacity at any time. The ECO-WORTHY LiFePO4 100Ah Bluetooth battery management system is equipped with low-temperature, overvoltage/undervoltage, overcurrent, overcharge, and short-circuit protection, interrupting charging and preventing damage to the LiFePO4 battery when the charging temperature is below 0°C.

Multiple protection: This 48V 100Ah Bluetooth LiFePO4 battery provides multiple layers of protection in a sturdy all-metal housing.

It also features a 125A circuit breaker and a battery switch to ensure your solar system is safe under all conditions.

3x energy density and 8x lifespan: The ECO-WORTHY 48V 100Ah LiFePO4 battery has three times the energy density and one-third the weight of a lead-acid battery. It can withstand up to 15,000 cycles with a service life of 10 years, reducing the environmental impact of used batteries, and is an excellent choice for replacing lead-acid batteries.

Supports 32P, maximum energy 163840Wh: The ECO-WORTHY 48V 100Ah LiFePO4 battery can be connected in parallel with up to 32 modules, forming a 51.2V 1500Ah system capable of storing up to 163,480Wh of energy, providing stable power for home energy storage, garden solar installations, and complete solar systems. Buy 6 batteries and receive a free 3U cabinet.

Warning: The lithium battery cannot be used as a starter battery.

Q: Which communication protocols are supported?

A: It supports common protocols, with Pylon as the default. RS485-1 supports: Pylon, Growatt, Voltronic, LXP, Deye, INVT, SRNE (Rich Solar), SMK. CAN supports: Pylon, Growatt, Goodwe, Sofar, Victron, Voltronic, LXP, Deye, GINLONG, SMA, VMI, SRNE, INVT, etc. If you have any questions about supported protocols, please feel free to contact us.

Q: Which inverters can communicate with it?
A: It supports mainstream inverters: Victron, Deye, Growatt, INVT, Luxnower, Megarevo, Must, Sol-Ark, Sofar, Sofcec, SRNE, Voltronic, Goodwe, Pylontech, Sungoldpower, EG4 3000, etc.

Q: Can the 48V 100AH V3 server rack battery communicate in parallel with the 48V 100AH V2 server rack battery?
The DIP switch setting principle is the same. Due to the limit on the number of DIP switches, V2 must be installed within the first 15 batteries, while V3 has no limit.

Q: What should I pay attention to when connecting V3 and V2 in parallel?
Make sure the polarity is correct when wiring, and avoid reversing the battery, as this may disable the cells.

Use 2AWG+ cables for parallel connections. Refer to the previous Q&A to configure the battery layout.

On May 7, 2026 at 04:35:30 CEST, the seller added the following information.