ClaraMed Battery/USB LED Light Source Compatible with...

  

Portable intelligent light source compatible with Storz endoscopes and Storz light cable. Welcome and thank you for choosing our new Portable LED smart light source. The portable LED light source provides twice the brightness of most portable light sources on the market. This model has the advantage of having a connection for Storz light cable, allowing you to place the light source in your pocket while connecting it via the cable.

This provides more flexibility in the use of the endoscope and also avoids the weight and heat of the light source. Now it can be safely used in long surgeries without worrying about battery drain, thanks to the available external USB power supply. The micro USB power and charging slot make charging easy at any time and anywhere with any USB charging slot.

The micro USB slot is not only used for charging, but also for powering the light source, so you don't have to worry about battery drain during long surgeries. Unlike the mechanical switch button that wears out over time in most portable light sources on the market, the smart portable light source has an intelligent switch button and controller with LED indicator that allows for control of light intensity and also provides data on battery charge level and status.

Standard USB port to use this light source as a power bank for emergency smartphone charging. The included battery is a genuine LG battery with a reliable capacity that lasts over 3 hours "depending on the brightness level used" and a long lifespan with over 500 cycles of use. Dimming circuit for optimal control of light intensity. Intelligent circuit that stops charging when the charge is complete and stops the device when the battery is almost empty, thus achieving maximum battery protection with a longer lifespan. The light source can be directly connected to Storz endoscopes or endoscopes with a Storz thread. It can also be connected to light cables that have a Storz connection thanks to the included adapter (please refer to the photos).

On first use, the battery should be fully charged as it is delivered with only 40% factory charge. To expose the USB charging slot, turn the head of the light source counterclockwise. The LED indicator on the switch button turns red when charging and turns blue when charging is complete. Now you can unplug the charger and start using the device. Connect the endoscope or light cable to the light source.

The light turns on with moderate intensity (recommended intensity for most examinations and long surgeries). Press the power button again within 2 seconds>. The light will turn to its maximum intensity (ideal for short procedures that require intense light - do not use for more than 10 minutes). Pressing the power button after 2 seconds of turning on will turn off the device.

When the device is on in one of the above modes, long press the power button to start the dimming function. Leave the button to keep desired.

Rapidly pressing 2 times will activate the strobe function (beta). The LED indicator on the power button turns blue when the battery is charged, red when it is low, and flashes red when the battery is empty before the device turns off. For endoscopes with Storz adapter, please first remove the adapter, then connect the light source to the endoscope's internal thread. For Olympus endoscopes, a special adapter must be connected (sold in S3 and S4 models).

To connect Storz or Olympus light cables, a special adapter must be connected (sold in S2 and S4 models for Storz cable, and in S3 and S4 models for Olympus cable). This light source supports most rigid and flexible endoscopes, if you are unsure if your endoscope will work or not, please contact us before making the purchase. The included battery comes with about 40% charge.

Please fully charge the battery before using it. For a longer battery life, please do not fully charge or discharge the battery.

If the device must be stored for a long period, please keep the battery in a partially charged state (about 50%) and do not store when it is discharged. The light source is not autoclavable. To use the device in clean procedures, it will be necessary to wrap the light source with sterile gloves or another sterile covering. For overheating protection in maximum light mode, the power of the light source drops to 70% after continuous use for 5 minutes and remains at 70% power.

Turning off the light and then turning on again in high mode will restore the power to 100%. USB output power: 5V 1A. EMITTER BAC: T6 up to 10 W. BAC color: neutral white (daylight).

Operating voltage: 3-4.2 V. Power supply: 1 x 18650. Real lumens: up to 1000 lumens. Operating time: 3-5 hours (depending on the brightness level used). Number of modes: one press to start at moderate intensity - press again within 2 seconds gives maximum light - long press 2 seconds: 10%-100%.

Press quickly twice to enter strobe mode (beta). Switch type: smart touch switch with LED indicator.

Dimensions: 13.5 cm x 2.6 cm. Weight: 134 g with battery inside. Portable LED light source (endoscope not included). 2-Accessory to attach Storz light cable (cable not included). Items usually take 5-10 days to be delivered in most countries worldwide.

International buyers - please note. Import duties, taxes, and charges are not included in the item price or shipping cost. Please check with your country's customs office to determine what these additional costs will be before.